Remote control Solar Alarm Lamp Motion Sensor
Dahua DHI-HY-M1 Air Quality Monitor
Dahua DHI-HY-C102-4 Fire Alarm Control Panel
WisuAlarm DHI-HY-SA40A Smoke Alarm
The WisuAlarm DHI-HY-SA40A Smoke Alarm features:
- Split-spectrum sensor technology.
- Test and silence features in one single button, silenced by a working infrared remote controller.
- Loud sound output over 85.0 dB(A) at 3 meters.
- Low quiescent current consumption.
- Surface-mount device (SMD) circuit board design.
- Low battery warning signal.
- Sealed lithium battery, easy installation.
Roisock Wireless PIR Motion-Sensor
Lightsys GSM-module for Alarm-system
Lightsys Expander 8-Zone Input
The Lightsys Expander 8-Zone Input has the following features;
- 8 Hardwired zone input
- Maximum 3 x CP179 hard wired expanders per panel
- Current consumption: 13.8VDC +/-10%, 25 mA typical/30 mA max
- 4-Wire Bus connection, up to 300 meters from main panel
- Additional auxiliary power output
- Tamper zone input
Prosys 140 Alarm Control-Panel
The Prosys 140 Alarm Control-Panel has the following features;
- 8 zones expandable up to 128 4 or 8 system partitions
- Auto-Install™ technology assures simple installation Bus test for pinpointing faulty wiring
- Triple EOL termination for Grade 3: Allows alarm, tamper and mask on each single zone 4 groups per partition – enabling partial arming of a group of zones within a partition
- Up to 32 schedules for arm/disarm and output control, supporting 2 intervals per day
- High security features such as double password, keypad disable during scheduled arm, and 2 separate buses
- 6 fully programmable utility outputs onboard – one 3A relay, one 500mA open collector and four 70mA O.C.
- False alarm prevention features – such as fire alarm verification, programmable swinger shutdown, cross zoning, pulse counting, transmission delay, audible/visual exit delay
- One-man walk test Watchdog periodically performs self-test of the system
- Up to 99 user codes
- Up to 999 event log
- Box tamper
- Bell/Siren tamper
- Built in Siren Driver (900 mA)
- Automatic fuses
Prosys 116 Alarm Control-Panel
The Prosys 116 Alarm Control-Panel has the following features;
- 8 zones expandable up to 128
- 4 or 8 system partitions
- Auto-Install technology assures simple installation
- Bus test for pinpointing faulty wiring
- Triple EOL termination for Grade 3: Allows alarm, tamper and mask on each single zone
- 4 groups per partition – enabling partial arming of a group of zones within a partition
- Up to 32 schedules for arm/disarm and output control, supporting 2 intervals per day
- High security features such as double password, keypad disable during scheduled arm, and 2 separate buses
- 6 fully programmable utility outputs onboard – one 3A relay, one 500mA open collector and four 70mA O.C.
- False alarm prevention features – such as fire alarm verification, programmable swinger shutdown, cross zoning, pulse counting, transmission delay, audible/visual exit delay
- One-man walk test
Secolink 16-Zone Intruder Alarm Control-Panel
The Secolink 16-Zone Intruder Alarm Control-Panel has the following features:
- Concept of Modular System
- 1-4 Partitions
- 3-31 user codes
- 8-16 wired zones
- 1-15 keypads in system
- 512 events memory
- Remote system programming PSTN, GPRS, or LAN,
- Remote control macro command
- Remote arming, disarming, alarm clearing, with user code, by cell phone
- Room Temperature request by cell phone and temperature value results by SMS