stainless steel traps 50m packet
Feature
- Stainless Steel Crab Trap (ø30"xx12"H) with 3 large entrance
- Dual ramped entry tunnels with one-way latches along with two escape tunnels for smaller crabs
- Large latched top with bungee and hook lock allows for easy access to and removal of your catch
- 1/4"x100' Lead Core sinking line; 4-Arm Harness
- 5"x11" Red/White Float; Crab trap bait bag (Stretched
Fiber Access Terminal (FAT) black with 1*16 Bare Splitter
Fiber End-Face Cleaning Pen
The Fiber End-Face Cleaning Pen has the following Features:
- The removes dust and oil adhering to the ferrule end face of fiber optic connector with one push mechjanism, hence making it one of the best fiber devices for signal restoration.
- In addition this device is made of superfine fiber, thus able to achieve a higher cleaning effect.
- It is also able to provide over 750+ engagements per unit.
- Equally important the device that is a dry cloth cleaner, will easily clean clean single fiber connectors residing in an adapter, faceplate or bulkhead.
- The dust cap of the cleaner acts as an adapter for cleaning unmated connectors.
- Easy one push motion engages connector and initiates cleaner.
- This device is superior in that it is made from antistatic resins.
- Cleaning micro fibers are densely stranded and debris free.
ODF 12Core SC Simplex Optical Distribution Frame
ODF 24Core SC Simplex Optical Distribution Frame
ODF 24Core SC Duplex Optical Distribution Frame
D-Link DEM-311GT Gigabit Multi-Mode SFP
The D-Link DEM-311GT Gigabit Multi-Mode SFP has the following features:
- Small Form factor Pluggable (SFP).
- Multi-Source Agreement (MSA) specification compliant.
- IEEE 802.3z standard.
- Supports cable distances of up to 550 m / 1 km / 2 km / 10 km.
- Hot pluggable.
- FDA, CDRH, TUV Laser Eye safety certified.
- TTL signal detect indicator.
- Metal enclosure for lower EMI.
TP-Link MC100CM Media Converter
The TP-Link MC100CM Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 2km.
Commando CMD-SM-1G Gigabit 10KM SFP
The Commando CMD-SM-1G Gigabit 10KM SFP has the following features:
• The Anti Electro-Static Discharge and Radiation Resistant.
• Compatible for Single Mode/Multi-Mode fiber.
• Class 1 Laser Safety.
• Comes in a Plug and Play design, thus vert easy to install.
• Operates at Wavelength 850nm/1310nm/1550nm.
• Form Factor SFP (Small Form Factor Pluggable) MSA & ROHS Compliant.
• Plug and Play design simplifies installation with self-adaption.
• Standard size, Compact casing, dust proof.e device is hot swappable SFP/SFP+/QSFP/QSFP+28 with robust design.
• Has a data transfer Rate Up to 100 Gbps.
• Distance Support up to 120km.
• Connectivity Media is LC duplex with receiver type PIN.
• DDM function supports real-time monitoring for transceiver status.
• Fully Compatible with most popular, Top brand Products along with all COMMANDO devices.
• Low Power Consumption <1W and low latency 100us typical allow your network devices to work efficiently.
• EMC Support
8core FTTH Fiber Optic Distribution Box
TP-link MC110CS Media Converter
The TP-link MC110CS Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode.
- Ranges up to 20km (12.4 miles) transmission distance with 9/125 μm single-mode fiber.
Indoor Drop cable 2KM-Roll Fiber
TP-Link MC-111 Media Converter
The TP-Link MC-111 Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Auto-negotiation of Half-Duplex / Full-Duplex transfer mode.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
- Work with MC112CS WDM single fiber media converter.
- Extends fiber distance up to 20km.
TP-Link TL-MC112 Media Converter
The TP-Link TL-MC112 Media Converter has the following features:
- The device complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Also has auto-negotiation of Half-Duplex / Full-Duplex transfer mode.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
- Extends fiber distance up to 20km.
D-Link DMC 520SC 2Port Single-mode Media-Converter
The D-Link DMC 520SC 2Port Single-mode Media-Converter has the following Features:
- Has (1) 10/100BASE-TX RJ-45 port to 1, 100BASE-FXÂ SCÂ port.
- Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex)
- Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex)
- Half-duplex/full-duplex
D-Link DMC-515SC Multimode Media-Converter
The D-Link DMC-515SC Multimode Media-Converter has the following features:
- The DMC-515C converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15KM apart.
- The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals. Maximum fiber cable distance is 15 - 60 km. 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
- The DMC-515SC media converter supports maximum 15 km fiber cable distance.
- The media converters come with their own solid metal case housing, LED status indicators and external AC power adapters.
- They can be used as stand-alone converters, or installed in a DMC-1000 chassis.