Fiber Optical Bare Splitter 1×16

KSh1,200KSh2,000 (-40%)

In stock

Fiber Optical Bare Splitter 1×16 True-Tech

1X16 Bare PLC Steel Tube 250µm Single Mode Fiber  is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.

Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 – 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ? 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 – 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 – 85°C , between 10°C and 23°C – 85% RH, at 85°C – 20%RH, between °C and 85°C – maintain a linear change in RH, below 10°C – uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
Be the first to review “Fiber Optical Bare Splitter 1×16”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu

Fiber Optical Bare Splitter 1x16Fiber Optical Bare Splitter 1x16

Fiber Optical Bare Splitter 1x16

KSh1,200KSh2,000 (-40%)

Add to Cart
× How can I help you?