Unify UVC-G3 Dome Camera True-Tech

Unify UVC-G3 Dome Camera

UVC-G3-DOME Product Specifications:

General:
Networking Interface: The device comes with One (1) 10/100 Ethernet Port, hence easy to install.
Sensor: 1/3″ 4-Megapixel HDR Sensor.
Lens : EFL 2.8 mm, f/2.0.
Night Mode : IR LEDs with Mechanical IR Cut Filter.
Microphone : Yes.
Button : Factory Reset Button.
Power Method : 802.3af PoE or 24V Passive PoE.
Power Supply 802.3af PoE Switch or 24V, 0.5A PoE Adapter that is Included with Single-Pack.
This device comes with a Maximum Power Consumption of 4W.
The Camera Mounting can either be Wall, Ceiling or Table mounted.
For high efficiency the camera requires an operating Temperature of -30 to 70° C (-22 to 158° F),
And also an operating Humidity of 20 – 90% Noncondensing

Video:
This device supports a Video Compression of H.264, hence making this camera highly suitable for security and surveillance.
In addition the camera has a Resolution of 1080p Full HD, that is 1920 x 1080.
Maximum Frame Rate : 30 FPS
Image Settings : Brightness, Contrast, Sharpness, Saturation, Noise Reduction, 50/60 Hz

Other features: 
The cameras Viewing Angle, Before Lens Correction and After Lens Correction is provide at:
100.4° (H), 59.1° (V), 117.3° (D) and  87.8° (H), 55.4° (V), 96.4° (D)
Supported UniFi Video Version UniFi Video 3.2 (or Newer)
UniFi Video System Requirements 64-bit Microsoft Windows 10/8/7, Ubuntu 14.04 or 16.04, or Debian 7.0 System with
an Intel or Compatible 1.86 GHz (or Above) Processor and a Minimum of 4 GB RAM