TP-Link TL-FC111B-20 10/100Mbps Media-Converter
The TP-Link TL-FC111B-20 10/100Mbps Media-Converter has the following specifications:
- The device complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
- 9/125 μm SMF (Single-Mode Fiber).
- Bidirectional WDM communication on a single fiber.
- Has a Range of up to 20km.
- Work with TL-FC111B-20 as a pair.
Fiber Optic Tool Kit
24Core Single-Mode Fiber outdoor PE-8000m
12Core Single-Mode Fiber outdoor-OS2-12000m
4Core Single-Mode Fiber outdoor-OS2-4000m
Fiber End-Face Cleaning Pen
The Fiber End-Face Cleaning Pen has the following Features:
- The removes dust and oil adhering to the ferrule end face of fiber optic connector with one push mechjanism, hence making it one of the best fiber devices for signal restoration.
- In addition this device is made of superfine fiber, thus able to achieve a higher cleaning effect.
- It is also able to provide over 750+ engagements per unit.
- Equally important the device that is a dry cloth cleaner, will easily clean clean single fiber connectors residing in an adapter, faceplate or bulkhead.
- The dust cap of the cleaner acts as an adapter for cleaning unmated connectors.
- Easy one push motion engages connector and initiates cleaner.
- This device is superior in that it is made from antistatic resins.
- Cleaning micro fibers are densely stranded and debris free.
NF2100 Laser Distance Tester-100M
The NF2100 Laser Distance Tester-100M has the following Features:
- Measurement of distance, then the measured results will display on the Screen, and the results will also be stored in the system automatically.    Â
- The Max and Min measurement results will display on the auxiliary screen.
- Area will be calculated automatically by the device, and the result will show on the main display.
- 3 kinds of pre-designed measuring mode to get unilateral distance of triangle by ways of Pythagorean proposition.
Universal Fiber Optic Stripper
SAT-3C04 Optical Visual Fault-Locator
The SAT-3C04 Optical Visual Fault-Locator has the following Features:
- This device is suitable for identifying fiber breaks, bend, splices and other loss fault.
- Large power up to 650nm red laser.
- Transmitting continuous light or 1Hz modulated light.
- It comes with a slick design that is a pen-shaped design, small in size, light weight, thus making it easy to use, store and handle.
- For ease in use it is powered by standard AA alkaline batteries.
- 2.5nm universal connectors.
SAT-3E Optical Laser Source
The SAT-3E Optical Laser Source has the following Features:
- High sensitivity, multi output power.
- Multi wavelengths optional, up to four wavelengths on two ports.
- Automatic power-off, off time setting range 30~90mins.
- Low battery alarm.
- LCD display.
- New-type conductive rubber switch, suitable for different operation environments.
SAT-4EX Mini-Optical Power Meter
The SAT-4EX Mini-Optical Power Meter has the following features:
- The Power meter comes with an LED Light, Thus making its management easy.
- It also has a wide measurement range, high resolution.
- This device is suitable for Single Mode and Multi Mode applications.
- It also has a 2.5mm universal connector.
- It also has an Auto power off, that can easily be cancelled.
SAT- 17T Fusion Splicer
SAT- 17T Fusion Splicer has the following Features:
- Ultra-low Splice loss.
- Mirror Less Design.
- Low weight , less than 2Kg with battery and bumper.
- Full automatic heater.
- 7 sec fast splicing.
- 7800mAH large Li battery pack.
- Compatible with bare fiber, tail fiber and indoor cable.
- Wind protect, dust-proof, water-proof.
Fiber Cleaver
Fiber Cleaver has the following features:
- Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing.
- 3 In 1 Fiber Holder have 2.5-3.0mm leather trunking, 0.9mm pigtail trunking, 0.25 bare trunking.
- Long life of 48,000 cuts with 16 position blades.
- Lightweight and rugged design for long term durability.
- Holds 250 µm and 900 µm fiber and comes with built in fiber trash can.
- Scaled holder for accurate cleave lengths from 5 to 20 mm (0.20" to 0.79").
- Ideal for fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice.
